Product ID:F-150, 5428 GREEN PRIMER, MFR CODE N-110
MSDS Date:01/01/1987
FSC:8010
NIIN:00-437-6757
Kit Part:Y
MSDS Number: BDYXT

JOTUN-BALTIMORE COPPER PAINT CO.

Emergency Phone: (301) 539-0045

Cage: 85319

JOTUN-BALTIMORE COPPER PAINT CO.

Cage: 85319

EPOXY RESIN

Fraction By Weight: 43.4%

N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 5.9%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

AROMATIC HYDROCARBON-EXXON AROMATIC 100(FORMERLY SOLVESSO

Fraction By Weight: 25.5%

ACGIH TLV: 100 PPM (MFR)

MAGNESIUM SILICATE

Fraction By Weight: 9.9%

CASTOR OIL DERIVATIVE

RTECS: FI4100000

Fraction By Weight: 0.5%

Effects of Overexposure:INH: ANESTHETIC. IRRIT RESP TRACT. ACUTE CNS
DEPRESS: HDACHE, DIZZ, UNCON, COMA. SKIN/EYE IRRIT.

First Aid:INH: REMOVE FROM EXPOSURE. RESTORE BRTH. KEEP WARM/QUIET,
CALL MD. EYES: FLUSH IMMED W/LG AMT WATER 15 MIN. TAKE TO MD. SKIN:
WASH W/WATER. REMOVE CONTAM CLOTHING. CONSULT MD.

Flash Point:115F PMCC
Lower Limits:1.2
Extinguishing Media:CARBON DIOXIDE, DRY CHEM, FOAM
Fire Fighting Procedures:FULL PROT EQUIP, SELF-CNTND BRTH. WATER-COOL
CNTNR W/FOG NOZ
Unusual Fire/Explosion Hazard:CLOSE CNTNR TIGHT, ISOLATE FROM IGNIT
SOURCES. CLOSED CNTNR MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID BRTHNG
VAPORS. VENT AREA. CONTAIN & REMOVE W/INERT ABSORBENT, NON SPARKING
TOOLS.

Handling and Storage Precautions:DO NOT STORE ABOVE 100F. KEEP CLOSURE
TIGHT. DO NOT STORE OR USE NEAR HEAT, SPARKS, FLAME.
Other Precautions:DO NOT GET IN EYES. AVOID PROLONGED CNTCT W/SKIN,
BRTHNG OF VAPORS OR SPRAY MIST. DO NOT TAKE INTERNALLY.

Respiratory Protection:USE NIOSH/MSHA APPRVD
Ventilation:DILUTION OR LOCA TO KEEP VAPOR BELOW TLV
Protective Gloves:SOLVENT RESIST
Eye Protection:SAFETY W/SPLASH GUARDS
Other Protective Equipment:USE PROT CREAM WHERE SKIN CNTCT LIKELY
Supplemental Safety and Health
VAP DENS.>1 THE AROMATIC HYDROCARBON IS SOLVESSO 100 CONTAINING >92%
ALKYLATED BENZENES (MAINLY C*8 AND C*10).WT/GAL 10.0LB ADD INGRED
DIATOMACEOUS SILICA 14.8% CONFORMS TO MIL-P-24441/1

Boiling Pt:B.P. Text:311-344 F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:35.1

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH TEMPS & CONTAM W/FOREIGN MATLS
Hazardous Decomposition Products:HAZ FUMES WHEN HEATED DECOMP

Waste Disposal Methods:DISPOSE IAW LOCAL, STATE, FED REG. INCINERATE IN
APPRVD FACILITY. DO NOT INCINERATE CLOSED CNTNRS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.